Search:


Comp II LED Comp II SCX Black SCX Silver SCX White 60s Muscle MINI Factory Match Liquid Filled Non-Filled Direct Mount Engine Thermometers Accessories All Gauges
1" Dial (K) 1½" Dial (A) 2¼" Dial (B) 3" Dial (E) 3" Asphalt (E) 3" Bottom Mount (J) 3" Asphalt (J) 3" Adjustable (ADJ3) 5" Dial (G) 5" Adjustable (ADJ5) 5" Bottom Mount (GJ) Engine Thermometers Capillary Thermometers All Thermometers
2" All SS (Q3) 2½" All SS (K) 2½" SS/Brass (J) 4" All SS (G) 4½" Process (MPB/SC) 6" All SS (H) All McDaniel Gauges
General Service Severe Service, 63mm Severe Service, 100mm Diaphragm Gauges Process Gauges All MARSH Gauges MARSH PDF Catalog
Address, Phone, Fax Request Info
Contact Us About Marshall Search Catalog FAQs Site Index

Model E: 3" Dial
Item: E

3 in Dial Bimetal Thermometer

Technical Documents
Technical Documents
Model E: Drawings & Specifications (PDF)
Temperature Ranges Available (PDF)

FAQs
Frequently Asked Questions

  Products > Bimetal Thermometers
Model E: 3" Dial
Item: E

Marshall Instruments offers 3" heavy duty, industrial bimetallic thermometers. These thermometers are rugged and preferred by the process, offshore, power, pharmaceutical and chemical industries. 1/2" NPT center back connection is standard. Other connection types are available. Cases may be liquid filled for additional dampening of extreme vibration, or to assure consistent performance in low process temperature/high environmental humidity applications. Glass lens is standard, a plastic lens is available as an option. Standard stem diameter is 0.25" and heavy duty stems are available. A spiked stem tip is available. Stem length can be custom ordered from 2.5" to 92" in 1/4" increments. Accuracy is 1% of full scale.

Specifications

  • DIAL: 3"
  • STEM DIAMETER: .25"
  • CONNECTION: 1/2" NPT Center Back
  • CONSTRUCTION: All stainless steel construction.
  • ACCURACY: +/- 1% of scale.
  • HERMETIC SEAL: Weather tight.
  • LENS: Glass
  • OVER RANGE: 50% to 500 DEGF and 10% over 500 DEGF.

General Information
All stainless steel head, bezel and mounting. Flat window standard.

Mountings
Number 1 - 1/2" NPT mounting is standard. 1/4" - 3/8" - 3/4" - 1" NPT are available at a surcharge.

Stem
18-8 Type 304 stainless steel, .250 diameter. Lengths from 2 1/2" to 92".

Head
Model E: 3" diameter.

Made in the U.S.A.
This product is proudly made in Anaheim, California USA.

Made in USA

Marshall Instruments
Bimetal Thermometers
Rev. 1/7/2012


About Us · Search Catalog · FAQs · Contact · Site Map · Home

©2014 Marshall Instruments, Inc.
Design: BWE, Inc.
  info@marshallinstruments.com
1-714-632-8565



  Auto Gauges Thermometers McDaniel Marsh