OIl Pressure Sending Unit. 240-33 ohm / 0-100 PSI

Search:

Comp II LED Comp II SCX Black SCX Silver SCX White 60s Muscle MINI Factory Match Liquid Filled Non-Filled Direct Mount Engine Thermometers Accessories All Gauges

1" Dial (K) 1½" Dial (A) 2¼" Dial (B) 3" Dial (E) 3" Asphalt (E) 3" Bottom Mount (J) 3" Asphalt (J) 3" Adjustable (ADJ3) 5" Dial (G) 5" Adjustable (ADJ5) 5" Bottom Mount (GJ) Engine Thermometers Capillary Industrial All Thermometers

Utility, Lower Mount SS/Brass, Lower Mount SS/Brass, Center Back SS/Brass, U-Clamp SS/Brass, Panel Mount All SS, Lower Mount All SS, Panel Mount 4" All SS 4.5" Process Gauges

2" All SS (Q3) 2½" All SS (K) 2½" SS/Brass (J) 4" All SS (G) 4½" Process (MPB/SC) 6" All SS (H) All McDaniel Gauges

General Service Severe Service 63mm Severe Service 100mm Diaphragm Gauges Process Gauges All MARSH Gauges MARSH PDF Catalog

Address, Phone, Fax Request Info

Oil Pressure Sender (240-33 Ohm)
Item: 9205

OIl Pressure Sending Unit. 240-33 ohm / 0-100 PSI

Products > Accessories
Oil Pressure Sender (240-33 Ohm)
Item: 9205

Oil pressure sender (isolated). Input: 0-100 psi, Output: 240-33 ohms. Used with SCX full sweep 0-100 PSI oil pressure gauges*. Connection: 1/8" NPT. Stamped "0-100 PSI, 240-33 Ohm" on hex.

Connections:

Connect "-" terminal to common ground
Connect "S" terminal to gauge signal input

Input/Output range:

0 PSI = 240 ohms
20 PSI = 198 ohms
40 PSI = 156 ohms
60 PSI = 114 ohms
80 PSI = 72 ohms
100 PSI = 30 ohms

*SCX gauges made before 2014 use the Marshall 9200 oil pressure sending unit. Verify which type of oil pressure sending unit you have before ordering a replacement.

Marshall Instruments
Accessories
Rev. 10/25/2018

About Us · Search Catalog · FAQs · Contact · Site Map · Home

info@marshallinstruments.com
1-714-632-8565


Auto Gauges	Thermometers	McDaniel	Marsh
Comp II LED Comp II SCX SCX Sport 60's Muscle MINI Cooper 1.5" Mechanical Accessories	1" Dial (K) 1½" Dial (A) 2¼" Dial (B) 3" Dial (E) 3" Asphalt (E) 3" Bottom Mount (J) 3" Asphalt (J) 3" Adjustable (ADJ3) 5" Dial (G) 5" Adjustable (ADJ5) 5" Bottom Mount (GJ) Engine Thermometers Capillary Industrial Bimetal Needle Valves Needle Valves	2" All SS (Q3) 2½" All SS (K) 2½" SS/Brass (J) 4" All SS (G) 4½" Process (MPB/SC) 6" All SS (H) All McDaniel Gauges PDF Catalogs All Stainless General Service Fillable All SS Utility Process Gauges Filled SS/Brass Utility (J6, T6) SS/Brass Utility (R7, T7, J7) Steel Case Utility (R8, T8, J8)	General Service Liquid Filled, 63mm Diaphragm Gauge (G) Process Gauge (P) Quality Gauge (H) Inspector Test (D) Test Gauge (D) All MARSH Gauges PDF Catalogs MARSH Product Catalog