|
|
|
|
|
|
Comp II LED
Comp II
SCX Black
SCX Silver
SCX White
60s Muscle
MINI Factory Match
Liquid Filled
Non-Filled Direct Mount
Engine Thermometers
Accessories
All Gauges
1" Dial (K)
1½" Dial (A)
2¼" Dial (B)
3" Dial (E)
3" Asphalt (E)
3" Bottom Mount (J)
3" Asphalt (J)
3" Adjustable (ADJ3)
5" Dial (G)
5" Adjustable (ADJ5)
5" Bottom Mount (GJ)
Engine Thermometers
Capillary
Industrial
All Thermometers
Utility, Lower Mount
SS/Brass, Lower Mount
SS/Brass, Center Back
SS/Brass, U-Clamp
SS/Brass, Panel Mount
All SS, Lower Mount
All SS, Panel Mount
4" All SS
4.5" Process Gauges
2" All SS (Q3)
2½" All SS (K)
2½" SS/Brass (J)
4" All SS (G)
4½" Process (MPB/SC)
6" All SS (H)
All McDaniel Gauges
General Service
Severe Service 63mm
Severe Service 100mm
Diaphragm Gauges
Process Gauges
All MARSH Gauges
MARSH PDF Catalog
|
|
What are the temperature limits of my gauge? General guidelines for a silicone filled mechanical pressure gauge with brass internals:
*It is generally accepted that the maximum temperature inside the sensing element of a brass internals gauge should not exceed 150F. This temperature limit is based on the fact that a lead tin solder (soft solder) is commonly used to seal the tip and socket on a bourdon tube type gauge with brass internals. At higher temperatures these joints may loose their strength and fail. Back to FAQs
|
|
|
|
|||||
| Auto Gauges | Thermometers | McDaniel | Marsh | ||
|
|||||