FAQ: Can I refill my 1.5" liquid filled gauge?

Search:

Auto Gauges | Bimetal Thermometers | Pressure Gauges | McDaniel | MARSH | Contact Us | Site Map

Comp II LED Comp II SCX Black SCX Silver SCX White 60s Muscle MINI Factory Match Liquid Filled Non-Filled Direct Mount Engine Thermometers Accessories All Gauges

1" Dial (K) 1½" Dial (A) 2¼" Dial (B) 3" Dial (E) 3" Asphalt (E) 3" Bottom Mount (J) 3" Asphalt (J) 3" Adjustable (ADJ3) 5" Dial (G) 5" Adjustable (ADJ5) 5" Bottom Mount (GJ) Engine Thermometers Capillary Industrial All Thermometers

Utility, Lower Mount SS/Brass, Lower Mount SS/Brass, Center Back SS/Brass, U-Clamp SS/Brass, Panel Mount All SS, Lower Mount All SS, Panel Mount 4" All SS 4.5" Process Gauges

2" All SS (Q3) 2½" All SS (K) 2½" SS/Brass (J) 4" All SS (G) 4½" Process (MPB/SC) 6" All SS (H) All McDaniel Gauges

General Service Severe Service 63mm Severe Service 100mm Diaphragm Gauges Process Gauges All MARSH Gauges MARSH PDF Catalog

Address, Phone, Fax Request Info

Contact Us About Marshall Search Catalog FAQs Site Index

Yes, but to prevent having different layers of fluid we recommend fully draining, rinsing, drying and then refilling.

Once you have fully drained, rinsed and dried out your gauge you can fill it with glycerin, silicone or mineral oil.

Remove the black rubber fill plug and drain the gauge.
Rinse the gauge with water, drain and allow to dry. Repeat until you have removed all of the silicone from the gauge.
Refill with glycerin, silicone, or mineral oil. Leave an air bubble to allow room for the fluid to expand when the gauge heats up.
Carefully reinstall the rubber fill plug.

About Us · Search Catalog · FAQs · Contact · Site Map · Home

©2024 Marshall Instruments, Inc.

info@marshallinstruments.com
1-714-632-8565


	Auto Gauges	Thermometers	McDaniel	Marsh
	Comp II LED Comp II SCX SCX Sport 60's Muscle MINI Cooper 1.5" Mechanical Accessories	1" Dial (K) 1½" Dial (A) 2¼" Dial (B) 3" Dial (E) 3" Asphalt (E) 3" Bottom Mount (J) 3" Asphalt (J) 3" Adjustable (ADJ3) 5" Dial (G) 5" Adjustable (ADJ5) 5" Bottom Mount (GJ) Engine Thermometers Capillary Industrial Bimetal Needle Valves Needle Valves	2" All SS (Q3) 2½" All SS (K) 2½" SS/Brass (J) 4" All SS (G) 4½" Process (MPB/SC) 6" All SS (H) All McDaniel Gauges PDF Catalogs All Stainless General Service Fillable All SS Utility Process Gauges Filled SS/Brass Utility (J6, T6) SS/Brass Utility (R7, T7, J7) Steel Case Utility (R8, T8, J8)	General Service Liquid Filled, 63mm Diaphragm Gauge (G) Process Gauge (P) Quality Gauge (H) Inspector Test (D) Test Gauge (D) All MARSH Gauges PDF Catalogs MARSH Product Catalog