|
|
|
|
|
|
Comp II LED
Comp II
SCX Black
SCX Silver
SCX White
60s Muscle
MINI Factory Match
Liquid Filled
Non-Filled Direct Mount
Engine Thermometers
Accessories
All Gauges
1" Dial (K)
1½" Dial (A)
2¼" Dial (B)
3" Dial (E)
3" Asphalt (E)
3" Bottom Mount (J)
3" Asphalt (J)
3" Adjustable (ADJ3)
5" Dial (G)
5" Adjustable (ADJ5)
5" Bottom Mount (GJ)
Engine Thermometers
Capillary
Industrial
All Thermometers
Utility, Lower Mount
SS/Brass, Lower Mount
SS/Brass, Center Back
SS/Brass, U-Clamp
SS/Brass, Panel Mount
All SS, Lower Mount
All SS, Panel Mount
4" All SS
4.5" Process Gauges
2" All SS (Q3)
2½" All SS (K)
2½" SS/Brass (J)
4" All SS (G)
4½" Process (MPB/SC)
6" All SS (H)
All McDaniel Gauges
General Service
Severe Service 63mm
Severe Service 100mm
Diaphragm Gauges
Process Gauges
All MARSH Gauges
MARSH PDF Catalog
|
|
Choice of Filling When you order a McDaniel Filled Gauge you may choose to fill it yourself or you may order it factory filled with the liquid of your choice. Thus, you can maximize inventory utility and minimize inventory cost. Glycerin filling has a lower operating temperature limit of 32 DEGF undiluted. The mixture of distilled water in proportions up to 35% will lower the limit commensurately, to -40 DEGF. Silicone can extend the lower temperature limit to -60 DEGF. The maximum temperature limit is not determined by the fluid but by the gauge's synthetic case seal. At elevated temperatures the seal may bake and loose its elasticity. Warning: Glycerin filled gauges should not be used in applications involving strong oxidizing agents such as chlorine, nitric acid or hydrogen peroxide. Back to FAQs
|
|
|
|
|||||
| Auto Gauges | Thermometers | McDaniel | Marsh | ||
|
|||||